Elegoo

This section of the Jackson Journal is devoted to better understanding the products from the company Elegoo. [ elegoo.com ]
ELE comes from the word electronic, which means open-source electronic. GOO comes from the word googol, meaning the 100th power of 10. … Elegoo implies the combination of open-source electronics and structures that creates everything.

Elegoo Sand Table

Elegoo Sand Table

The Elegoo Sand table is also known as the machine that erases what it creates.
Read Story
Password Door Lock using Elegoo and Tinkercad

Password Door Lock using Elegoo and Tinkercad

In this project, we will be building and coding a password screen and lock system. This is one of the more advanced projects but still easily achievable.
Read Story
Arduino - IOT Microcontroller by ~~ zorro ~~ is licensed under CC BY 2.0

Elegoo Ardunio Uno R3-LED Sequential Control

For the LED Sequential Control you will need your breadboard, uno, USB cable, 3 220 Ohm resistors, 4 jumper wires, and red, green, and blue LEDs.
Read Story
Arduino Uno R3 Elegoo Controlling A Servo Motor With A Joystick Project

Arduino Uno R3 Elegoo Controlling A Servo Motor With A Joystick Project

The materials you will need for this project are 3 breadboard jumper wires, 3 female-to-male dupont wires, a joystick, a servo motor, a uno R3 controller board, and a USB cable.
Read Story
Elegoo Arduino Uno R3- LED Dice

Elegoo Arduino Uno R3- LED Dice

How to build a LED dice using Arduino Uno! Parts you will need: Arduino UNO Board                                        x1 LED (generic)                       ...

Continue Reading
plouc68000,November 18,2018, Arduino project hub

Elegoo Arduino Uno R3 Clock

After doing a lot of research I found the simplest Elegoo Arduino Uno R3 clock.The design is simple and all you need is an Elegoo Arduino Uno, breadboard, two buttons and 16 m/m wires.
Read Story
Arduino Uno R3 Elegoo Controlling A DC Motor With A Joystick Project

Arduino Uno R3 Elegoo Controlling A DC Motor With A Joystick Project

Making the arduino uno r3 elegoo controlling a DC motor with a joystick project.
Read Story
The finished product

Elegoo Arduino Uno R3 – MIDI Pad

Do you want to take your music making skills to the next level? Well here's a way to help with that!
Read Story
Prius Power Button by Thom Watson is licensed under CC BY-NC-SA 2.0

Elegoo Arduino R3 Uno: How to make a light turn on using a button

This project I found and used the code for it, I found through the instructions used in the link below. The first thing you want to do is get all your parts needed for this project. 1 red led 1...

Continue Reading
How to Build a 10-Meter LED Display Using Elegoo Arduino Uno R3

How to Build a 10-Meter LED Display Using Elegoo Arduino Uno R3

Today, I'm going to teach you how to build a giant wall of LED that can display pictures, videos, and GIFs that you program onto it. Here are the Supplies you need to get started 1. An Arduino Uno (no...

Continue Reading
Turning on a motor fan using Elegoo starter kit.

Turning on a motor fan using Elegoo starter kit.

The purpose of this experiment is to build and control a motor fans spin speed.
Read Story
Elegoo Arduino Uno R3 How To Build A Button That Turns On/Off A LED Light

Elegoo Arduino Uno R3 How To Build A Button That Turns On/Off A LED Light

The following writing below are the directions and code for the LED button. Gotten from the Arduino software 1.8.13.
Read Story
Load More Stories
Activate Search
ESTEEM Center:  "We actually DO stuff with Science & Math."
Elegoo