Today, we figured out our Ultra Power UP240's fans did not work. So we had to use a bigger fan to cool the charger down. Luckily the batteries have not exploded, meaning we probably charged them correctly...

Today our group had to take apart some of the drone so that we could solder wires which would connect the controller board to the wires from the transmitter. After this, all we have to do is attach the...

Today, we figured out our electrical wires did not fit with the battery's plugs. So, we tried to cut off the shrink tube of the wires, then solder a suitable plug onto the wires to fit into the battery....

Today, we learned how to use an Ultra Power charger with this video. We also received two batteries to use with it. Next time, we will work more on the transmitter and receiver, which are hopefully the...

Today, we soldered the wires, that are from the motors and the ESC, together. We also added the flight controller on top of the ESC. Next time, we will pre-solder parts of the flight controller. Here...

Today, our group installed the ESC onto our drone and got the wires ready to solder. We are now waiting for the shrink tube to arrive. Once we get them, we will solder the wires from the motor to the...

We have received all of our parts today and have began to build the drone. We figured how to attach the motors and screw them in. Next time, we'll try to put the controller board on. These are the directions...