Sports Engineering

This Is How Are Soccer Balls Made

The design process is the most important thing

Soccer is the most popular sport in the world, and the soccer ball is the most crucial piece of gear. International regulations specify the soccer ball’s form, size, and weight even if the color and decorations on the outside may vary. The ball must have a spherical shape, and the circumference must be less than 27 inches (69.1 cm) or greater than 28 inches (71.1 cm) (68.6 cm.). At the beginning of the game, the ball’s weight cannot be greater than 16 ounces (0.448 kg) or lower than 14 ounces (0.392 kg). Due to leather’s propensity to absorb moisture, soccer balls are no longer made of leather and are instead constructed of synthetic leather.

The soccer balls components are listed below:

The ball’s covering is constructed from several panels that have been stitched together. The most common ball has 32 panels.

frequent and the one used in the majority of competitive matches. The Buckminster Ball, sometimes known as the “Buckyball,” has 20 hexagonal and 12 pentagonal surfaces. bearing the name of the American architect

It was Richard Buckminster Fuller who created the layout. The ball is nearly a perfect sphere after being stitched together and inflated. The soccer ball’s quality is influenced by the covering’s thickness. The ball’s strength, structure, and bounce come from numerous layers of lining made of a polyester or cotton blend that is backed by the covering. The air is kept inside the ball by the bladder. Typically, bladders are produced.

How soccer balls are created.

High-end soccer balls are hand-stitched, and the best soccer balls are made using a 5-ply twisted polyester cord. Low-cost balls are glued together, while mid-range balls are machine-stitched. The 32

Panels are pre-punched with holes for stitching and trimmed off. The ball is stitched from the inside out so that none of the stitches are visible on the exterior. In order to assemble the panels in the right order, the stitcher needs a guide. Each panel is stitched to completion with a different kind of needle so that the last knot is eliminated. To ensure that the bladder was not punctured by the needle, the finished ball is turned around and the bladder is placed. The ball is then deflated.

Related Stories: