Finally, after all of the building and planning, I tested out the new levitating top. After testing it, I realized how hard it is to actually levitate the top. I kept trying and trying, but still had no progress. I almost gave up, but kept trying and trying until it sort of worked. Levitating a top is not easy; you use the Plexiglas to elevate the top a little higher until you reach the “Sweet Spot”, where it starts to levitate a little. When I tested the product, it levitated off to the side, but I knew that this is important progress. So, I will continue to try and revise the product until it can actually float as a proper levitating top does.